Site Map
- Home page
- Site map
- Contact us
- Faculty and staff
- Group Members
- Erik Birkinbine
- Desmond Bourgeois
- Ivan Mendoza Bravo
- Eric Fusner
- Mark Hahn
- David Hodgson
- Adam Hope
- Kit James
- Margaret "Peggy" Kittila
- Verner C. Kreuter
- Timothy Luskin
- Josh McCarty
- Nathaniel McVicker
- Jeff Rodelas
- Dan Saltzmann
- Benjamin Sutton
- David Tung
- Doris Villalobos
- Xin Yue
- Alumni
- Research
- Friction Stir Welding of Steels
- Friction Stir Processing of Titanium
- Ductility-Dip Cracking in Ni-base Alloys
- Repair of Austenitic Stainless Steels for Elevated Temperature Service
- An Investigation of Hot Cracking in Hastelloy Alloy C-22
- Development of a Cast Pin Tear Test for Ni-base Superalloys
- Cr-free Consumables for Welding Stainless Steels
- A New Technique for Studying Phase Transformations
- Analysis of Welding Fume
- Aluminum-Steel Dissimilar Welding
- Weldability of Navy Steels
- Friction Stir Processing for Improving Material Properties and Weldability
- Evaluation of the Susceptibility to Solidification Cracking in High Chromium Ni-base Filler Metals for Nuclear Applications
- Development of a High Chromium, Ni-base Consumable for Nuclear Construction and Repair
- Development of Repair Procedures for Ni-base Turbine Engine Components using Laser Enhanced Net Shape (LENS) Technology
- Weldability and Service Performance of Ni-base Superalloys for Advanced Ultra-Super Critical Boilers
- Evaluation of PWHT Response of the Coarse Grain Heat-affected Zone in F22 Steel
- Effect of Alloying Additions on Solidification Behavior and Hot Cracking Susceptibility of High-Mn Steel Weld Metals
- Creep Strength Enhanced Ferritic Steels for Power Generation Applications: Development of Critical Transformation Temperatures Data Base
- Creep Strength Enhanced Ferritic Steels for Power Generation Applications: Prediction of Critical Temperatures
- Dissimilar Weldability of Steels to Ni-Base Alloys
- Development of Standardized Screening and Qualification Tests for Resistance to Hydrogen Cracking in Dissimilar Metal Welds in Subsea Service under Cathodic Protection
- Continuous Heating and Cooling Transformation Diagram in Ni-base Super Alloy Haynes 282: Phase Transformations — Microstructure — Properties Relationship
- Metallurgical Characterization of High Strength Alloys for Development and Optimization of an Induction Bending Process
- Optimization of Grade 91 Shielded Metal Arc Welding Consumable for Power Generation Applications
- Improvement and Modeling of the Cast Pin Tear Test
- Phase Transformation Analysis and Metallurgical Characterization of Ni-base Superalloys for Jet Engine and Gas Turbine Applications
- Facilities
- Testing
- Publications
- Textbooks and Proceedings
- Welding Metallurgy and Weldability of Stainless Steels
- Welding Metallurgy and Weldability of Nickel-base Alloys
- Hot Cracking Phenomena in Welds II
- Hot Cracking Phenomena in Welds III
- Review Papers
- Recent advances in welding metallurgy
- Recent advances in the understanding of material weldability
- Recent Developments in Weldability Testing (Keynote)
- Ni-Base Superalloys
- Effect of Multiple Postweld Heat Treatment Cycles on the Weldability of Waspaloy
- "The Effect of Rejuvenation Heat Treatments on the Repair Weldability of Wrought Alloy 718"
- Liquation Phenomena in the Simulated HAZ of Alloy 718 after Multiple Postweld Heat Treatment Cycles
- The Effect of Annealing Twin-Generated Special Grain Boundaries on HAZ Liquation Cracking of Nickel-base Superalloys
- The Effect of Grain Boundary Character Distribution on the Repair Weldability of Waspaloy
- Aluminum Alloys
- A method for studying weld fusion boundary microstructure evolution in aluminum alloys
- Simulation of Weld Fusion Boundary Microstructures in Aluminum Alloys
- Weldability of dissimilar 5000- and 6000-series aluminum alloy combinations
- Friction Stir Welding of Aluminum Alloys
- Stainless Steels
- Recent Developments in the Understanding of Stainless Steel Welding Metallurgy
- A new ferritic-martensitic stainless steel constitution diagrams
- The Relationship between Chromium Nitride and Secondary Austenite Precipitation in Duplex Stainless Steels
- Secondary austenite and chromium nitride precipitation simulated heat-affected zones of duplex stainless steels
- Effect of GTAW Flux on the Microstructure and Properties of Austenitic, Super Austenitic and Super Duplex Stainless Steel Welds
- Phase Transformations during Welding and Post Weld Heat Treatment of Supermartensitic Stainless Steel
- Dissimilar Welding
- Investigation of boundaries and structures in dissimilar metal welds
- Nature and evolution of the fusion boundary in ferritic-austenitic dissimilar metal welds, Part 1-Nucleation and growth
- Nature and evolution of the fusion boundary in ferritic-austenitic dissimilar metal welds, Part 2 - On-cooling transformations
- Ductility Dip Cracking
- Ductility-Dip Cracking Susceptibility in Nickel-base Weld Metals using the Strain-to-Fracture Test
- Development of the Strain-to-Fracture Test for Evaluating Ductility-Dip Cracking in Austenitic Stainless Steels and Ni-base Alloys
- An investigation of ductility-dip cracking in Ni-base filler metals-Part 1
- An investigation of ductility-dip cracking in Ni-base filler metals-Part 2
- An investigation of ductility-dip cracking in Ni-base filler metals-Part 3
- Development of the strain-to-fracture test for evaluating ductility-dip cracking in austenitic alloys
- High temperature cracking in nickel-base weld metal, Part 1- Ductility and Fracture Behavior
- High temperature cracking in nickel-base weld metal, Part 2- Insight into the mechanism
- New Insight into the Mechanism of Ductility Dip Cracking in Ni-base Weld Metals
- Weldability Testing
- Recent Developments in Weldability Testing (Keynote)
- Development of a Gleeble-based Test for Postweld Heat Treatment Cracking Susceptibility
- Methodology for In-situ Investigation of Phase Transformations in Welded Joints
- Evaluation of the Influence of Hydrogen on the Cold Cracking Formation in Welded Joints
- Applicability of Index for the Microstructural Inhomogeneity of Structural Steels
- Phase Transformation Analysis
- Photo Gallery
