CAMMAC Publications

• J.F. Wang, R.H. Wagoner, D.K. Matlock and F. Barlat: Anticlastic Curvature in Draw-Bend Springback, Int. J Solids and Structures, Vol. 42/5-6, pp. 1287-1307, 2005.
  
  
• J. Wang and R.H. Wagoner: A Practical Large Strain Solid Finite Element for Sheet Forming, Int. J. for Numerical Methods in Engrg., vol. 63., pp. 473-501, 2005.
  
  
• J.F. Wang, W.D. Carden, R.H. Wagoner, D.K. Matlock and F. Barlat: Creep and Anelasticity in the Springback of Aluminum, Int. J. of Plasticity, Vol. 20, Issue 12, pp. 2209-2232, 2004.
  
  
• J.F. Wang, R.H. Wagoner and D.K. Matlock: Effect of Anticlastic Curvature on Springback of Aluminum Sheets after the Draw-Bend Test, Proc. of NUMIFORM 2004, Materials Processing and Design, eds. S. Ghosh, J. M. Casto and J.K. Lee, Columbus, OH, USA, pp. 820-825, June 2004.(ISBN 0-7354-0189-6)
  
  
• J. Wang and R.H. Wagoner: A New Hexahedral Solid Element for 3D FEM Simulation of Sheet Metal Forming, Proc. of NUMIFORM 2004, Materials Processing and Design, eds. S. Ghosh, J. M. Casto and J.K. Lee, Columbus, OH, USA, pp. 2181-2186, June 2004.(ISBN 0-7354-0189-6)
  
  
• R.H. Wagoner: Sheet Springback, Continuum Scale Simulation of Engineering Materials, Fundamentals - Microstructures - Process Applications, eds. D. Raabe, F. Roters, F. Barlat and L.Q. Chen, Chapt. 42, pp. 777-794, Wiley-VCH, Weinheim, 2004. (ISBN 3-527-30760-5)
  
  
• Y.T. Keum, R.H. Wagoner and J.K. Lee: Friction Model for FEM Simulation of Sheet Metal Forming Operations (N328), Proc. NUMIFORM 2004, pp.989-994, Columbus, OH, June 13-17, 2004.
  
  
• W.D. Carden, L.M. Geng, D.K. Matlock and R.H. Wagoner: Measurement of Springback, Int. J. Mech. Sci., Vol. 44(1), pp. 79- 101, 2002.
  
  
• K.P. Li , W.P. Carden, and R.H. Wagoner: Simulation of Springback, Int. J. Mech. Sci, Vol. 44(1), pp. 103-122, 2002.
  
  
• L. Geng and R.H. Wagoner: Role of Plastic Anisotropy and Its Evolution on Springback, Int. J. Mech. Sci., Vol. 44(1), pp. 123-148, 2002.
  
  
• V. Karthik, R.J. Comstock Jr., D.L. Hershberger and R.H. Wagoner: Variability of Sheet Formability and Formability Testing, Int. J. Mat. Proc. Technol., vol. 121(2-3), pp. 350-362, 2002.
  
  
• L. Geng, Y. Shen and R.H. Wagoner: Anisotropic Hardening Equations Derived from Reverse Bend Testing, Int. J. of Plasticity, Vol. 18 (5-6), pp. 743-767, 2002.
  
  
• R.H. Wagoner: Fundamental Aspects Of Springback In Sheet Metal Forming, Proc. of NUMISHEET 2002, Design Innovation Through Virtual Manufacturing, keynote paper, eds. D.Y. Yang, S.I. Oh, H. Huh and Y. H. Kim, Jeju Island, Korea, vol. 1, pp. 13-24, 2002.
  
  
• Y. Choi, C.S. Han, J.K. Lee, and R.H. Wagoner: Effect of anisotropic axes rotation on springback, Proc. NUMISHEET 2002, Jaeju, Korea, October 2002.
  
  
• C.S. Han, Y. Choi, J.K. Lee and R.H. Wagoner: A FE formulation for elasto-plastic materials with planar anisotropic yield functions and plastic spin, Int'l J. of Solids and Structures, vol. 39, pp. 5123-5141, 2002.
  
  
• C.S. Han, Y. Choi, R.H. Wagoner, and J.K. Lee: Modeling of anisotropic work-hardening with rotation of orthotropic axes, Proc. NUMISHEET 2002, Jaeju, Korea, October 2002.
  
  
• L. Geng and R.H. Wagoner: The Effects of Plastic Anisotropy and Hardening on Sheet Springback, Proceedings of the THERMEC 2000 (CD), eds. T. Chandra, K. Higashi, C. Suryanarayana and C. Tome, 2001. (ISBN 0 08 044026 6)
  
  
• G. Jiang, G.S. Daehn, J.J. Lannutti, Y. Fu and R.H. Wagoner: Effects of Lubrication and Aspect Ratio on the Consolidation of Metal Matrix Composites under Cyclic Pressure, Acta Mater., 49 (8) pp.1471-1477, 2001.
  
  
• G. Jiang, G.S. Daehn and R.H. Wagoner: Void Filling and Cluster Breaking of Metal-Ceramic Composites Under Pressure Cycling, Scripta Mater., 44 287-292, 2001.
  
  
• L. Geng and R.H. Wagoner: Springback Analysis with a Modified Hardening Model, Sheet Metal Forming: Sing Tang 25th Anniversary Volume, SP-1536, Society of Automotive Engineers, Warrendale, PA, pp. 21-32, 2000.(SAE Publication 2000-01-0768).
  
  
• R.H. Wagoner, L. Geng and V. Balakrishnan: Springback Simulation with Non-Isotropic Hardening, Proc. 3rd ESAFORM Conference on Material Forming, ed. H.G. Fritz, Inst. Kunststofftechnologie, University of Stuttgart, pp. VII-3 - VII-6, 2000.
  
  
• S. Sriram and R.H. Wagoner: Adding Bending Stiffness to 3-D Membrane FEM Programs, Int. J. Mech. Sci., Vol. 42, pp. 1753-1782, 2000.
  
  
• R.H. Wagoner, L. Geng and V. Balakrishnan: Role of Hardening Law in Springback, Plastic and Viscoplastic Response of Materials and Metal Forming, eds. A.S. Khan, H. Zhang, Y. Yuan, Neat Press, Baltimore, MD, pp. 609-611, 2000.
  
  
• G. Jiang, Y. Fu, W. Wu, G.S. Daehn and R.H. Wagoner: Enhanced Densification of Metal Matrix Composites Under Cyclic Pressure, Proceedings of PM2TEC, 2000.
  
  
• W. Wu, G. Jiang, R.H. Wagoner and G.S. Daehn: Experimental and Numerical Investigations of Idealized Consolidation Part 1: Static Compaction, Acta Mater., 48 (17) 4323-4330, 2000.
  
  
• W. Wu, G. Jiang, R.H. Wagoner and G.S. Daehn: Experimental and Numerical Investigations of Idealized Consolidation Part 2: Cyclic Compaction, Acta Mater., 48 (17) 4331-4335, 2000.
  
  
• K.P. Li and R.H. Wagoner: Simulation of Deep Drawing with Various Elements, Proceedings of NUMISHEET 99, ed. J.C. Gelin and P. Picart, University of Franche-Compte, Besancon, France, pp. 151-156, 1999.
  
  
• K.P. Li, L.M. Geng, and R.H. Wagoner: Simulation of Springback with the Draw/Bend Test, IPMM 99, Vol. 1, eds. J.A. Meech, M.M. Veiga, M.H. Smith, S.R. LeClair, IEEE, Vancouver, BC, Canada, pp. 91-104, 1999.(ISBN 0-7803-5489-3)
  
  
• K. Li, L. Geng, and R.H. Wagoner: Simulation of Springback: Choice of Element, Advanced Technology of Plasticity 1999, Vol. III, ed. M. Geiger, Springer-Verlag, Berlin, pp. 2091-2098, 1999.
  
  
• M.C. Stasik and R.H. Wagoner: Forming of Tailor-Welded Aluminum Blanks, Int. J. Form. Processes, vol. 1 (1), pp. 9-33, 1998.
  
  
• S. Sriram and R.H. Wagoner: Failure Prediction with the Limiting Dome Height Test, Int. J. Form. Processes, vol. 1 (1), pp. 97-117, 1998.
  
  
• K. Li and R.H. Wagoner: Simulation of Springback, Simulation of Materials Processing, eds. J. Huetink and F.P.T. Baaijens, A.A. Balkema, Rotterdam, pp. 21-31, 1998.
  
  
• V. Talyan, R.H. Wagoner, and J.K. Lee: Formability of Stainless Steel, Metall. Mater. Trans. A, vol. 29A, pp. 2161-2172, 1998.
  
  
• V. Talyan, R.H. Wagoner, and J.K. Lee: Formability of Stainless Steel, Constitutive and Damage Modeling of Inelastic Deformation and Phase Transformation, Ed. A.S. Khan, Neat Press, pp. 425-428, 1998.
  
  
• D. Zhou and R.H. Wagoner: An Algorithm for Improved Convergence in Forming Analysis, Int. J. Mech. Sci., vol. 39, No. 12, pp. 1363-1384, 1997.
  
  
• C. Wong, M.L. Wenner and R.H. Wagoner: Corner Design in Deep-Drawn Rectangular Parts, Sheet Metal Stamping, Warrendale, PA, pp. 39-55, 1997.(SAE Publ. No. SP-1221)
  
  
• R.H. Wagoner, W.D. Carden, W.P. Carden, and D.K. Matlock: Springback after Drawing and Bending of Metal Sheets, Proc. IPMM '97 - Intelligent Processing and Manufacturing of Materials, eds. T.Chandra, S.R. Leclair, J.A. Meech, B. Verma, M. Smith and B. Balachandran, University of Wollongong, vol. 1 (Intelligent Systems Applications), pp. 1-10 [KEYNOTE], 1997.
  
  
• R.H. Wagoner and S. Sriram: Lessons Learned from Sheet Forming Benchmark Tests, THERMEC '97 - Thermomechanical Processing of Steel and Other Materials, eds. T. Chandra and T. Sakai, The Minerals, Metals, and Materials Society, Warrendale, PA, pp. 249-255, 1997.
  
  
• W. Wang, R.H. Wagoner, and X.J. Wang: Measurement of Friction Under Sheet Forming Conditions, Metall. Mat. Trans. A, vol. 27A, pp. 3971-3981, 1996.
  
  
• F.I. Saunders and R.H. Wagoner: Forming of Tailor-Welded Aluminum Blanks, Metall. Mat. Trans. A, vol. 27A, pp. 2605-2615, 1996.
  
  
• S. Sadagopan and R.H. Wagoner: Simulating the LDH Test, NUMISHEET 96, eds. J.K. Lee, G.L. Kinzel and R.H. Wagoner, The Ohio State University, pp. 128-135, 1996.
  
  
• S. Sriram, R.H. Wagoner, and D. Gearing: Affordable Testing for Sheet Forming Applications, Advanced Technology of Plasticity 1996 - Vol. II, ed. T. Altan, The Ohio State University, pp. 843-856, 1996.
  
  
• N. He and R.H. Wagoner: Springback Simulation in Sheet Metal Forming, NUMISHEET 96, eds. J.K. Lee, G.L. Kinzel, R.H. Wagoner, The Ohio State University, pp. 308-315, 1996.
  
  
• J.K. Lee, G.L. Kinzel and R.H. Wagoner, editors: NUMISHEET '96,The Ohio State University, 847 pages, 1996.
  
  
• Y. Kong, Y. Sun, X. Wang and R.H. Wagoner: Development of a New Friction Test Device in Sheet Forming, Advanced Technology of Plasticity 1996 - Vol. II, ed. T. Altan, The Ohio State University, pp. 835-838, 1996.
  
  
• K. Narasimhan, M.P. Miles, and R.H. Wagoner: A Better Sheet Formability Test, J. Mat. Proc. Technol., vol. 50, pp. 385-394, 1995.
  
  
• Y.T. Keum, Y.S. Suh, K. Chung, and R.H. Wagoner: 3-D FEM Analysis of Forming Operations for Planar Anisotropic Sheet Panels, Computational Mechanics '95, eds. S.N. Atluri, G. Yagawa, T.A. Cruise, Springer, Berlin, pp. 1408-1413, 1995.
  
  
• F.I. Saunders and R.H. Wagoner: The Use of Tailor-Welded Blanks in Automotive Applications, Simulation of Materials Processing: Theory, Methods, and applications - NUMIFORM 95, eds. S.F. Shen and P. Dawson, Balkema, Rotterdam, pp. 157-164, 1995.
  
  
• R.H. Wagoner, D. Zhou, and S. Sriram: The Element Bending Group Method, Computational Mechanics '95, eds. S.N. Atluri, G. Yagawa, T.A. Cruise, Springer, Berlin, pp. 1390-1395, 1995.
  
  
• D. Zhou and R.H. Wagoner: Development and Application of Sheet Forming Simulation, J. Mat. Proc. Technol., vol. 50, pp. 1-16, 1995.
  
  
• R.H. Wagoner, W. Wang, and S. Sriram: Development of OSU Formability Test and OSU Friction Test, J. Mat. Proc. Technol., vol. 45, pp. 13-18, 1994.
  
  
• S. Sriram, T. Brovold, and R.H. Wagoner: An Affordable Sheet Formability Test System, Metal Forming, vol. 28, pp. 63-70, 1994.
  
  
• R.M. Harycki, K.E. Gasper, R.J. Smola, F.I. Saunders, J.M. Garrett, and R.H. Wagoner: A New Method for Ranking Sheet Metal Lubricants, MetalForming, vol. 28, pp. 39-47, 1994.
  
  
• M.P. Miles, J.L. Siles, R.H. Wagoner, and K. Narasimhan: A Better Sheet Formability Test, Metall. Trans. A, vol. 24A, pp. 1143 - 1151, 1993.
  
  
• Y.S. Suh and R.H. Wagoner: Optimized Design of Tooling of the New Formability Test Using Finite Element Method, Computer Applications in Shaping and Forming Materials, ed. M.Y. Demeri, The Minerals, Metals, and Materials Society, Warrendale, PA, pp. 221-230, 1993.
  
  
• W. Wang and R.H. Wagoner: A Realistic Friction Test for Sheet Forming Operations, Advanced Technology of Plasticity - 1993, eds. Z.R. Wang and H. Yuxin, Int. Academic Publ., Beijing, pp. 1495-1500, 1993.
  
  
• F.I. Saunders, M.P. Miles, J.L. Siles and R.H. Wagoner: A Better Sheet Formability Test, Metal Forming, vol. 27, pp. 31-34, 1993.