CAMMAC Publications

• G. Jiang, G.S. Daehn, J.J. Lannutti, Y. Fu and R.H. Wagoner: Effects of Lubrication and Aspect Ratio on the Consolidation of Metal Matrix Composites under Cyclic Pressure, Acta Mater., 49 (8) pp.1471-1477, 2001.
  
  
• G. Jiang, G.S. Daehn and R.H. Wagoner: Void Filling and Cluster Breaking of Metal-Ceramic Composites Under Pressure Cycling, Scripta Mater., 44 287-292, 2001.
  
  
• G.S. Daehn, V.J. Vohnout and S. Datta: Hyperplastic Forming: Process Potential and Factors Affecting Formability, Superplasticity and Superplastic Forming, P.B. Berbon, M.Z. Berbon, T. Sakuma and T.G. Langdon, editors, Volume 601, pp. 247-253, 2000.
  
  
• G. Jiang, Y. Fu, W. Wu, G.S. Daehn and R.H. Wagoner: Enhanced Densification of Metal Matrix Composites Under Cyclic Pressure, Proceedings of PM2TEC, 2000.
  
  
• W. Wu, G. Jiang, R.H. Wagoner and G.S. Daehn: Experimental and Numerical Investigations of Idealized Consolidation Part 1: Static Compaction, Acta Mater., 48 (17) 4323-4330, 2000.
  
  
• W. Wu, G. Jiang, R.H. Wagoner and G.S. Daehn: Experimental and Numerical Investigations of Idealized Consolidation Part 2: Cyclic Compaction, Acta Mater., 48 (17) 4331-4335, 2000.
  
  
• G.S. Daehn, V.J. Vohnout and A. Tamhane: Electromagnetic actuator, method of use and article made there from, U. S. Patent 5,860,306, Issued January 19, 1999.
  
  
• V.J. Vohnout, G.S. Daehn and R. Shivpuri: A Hybrid Quasi-Static-Dynamic Process for Increased Limiting Strains in the Forming of Large Sheet Aluminum Parts, Advanced Technology of Plasticity, Proceedings of the 6th ICTP Conf., ed. M. Geiger, pp. 1359-64, 1999.
  
  
• L. Ceschini, G.S. Daehn, G.L. Garagnani and C. Martini: Friction and wear behaviour of C4 Al2O3/Al composites under dry sliding conditions, Wear 216, pp 229-38, 1998.
  
  
• G. Fenton and G.S. Daehn: Modeling Electromagnetic Forming of Sheet Metal, J. Mater. Proc. Tech. 75 pp.6-16, 1998.
  
  
• A.A. Tamnane, V.J. Vohnout, M. Padmanabhan, G. Fenton, V.S. Balanethiram, M. Altynova and G.S. Daehn: Opportunities in the High Velocity Forming of Sheet Metal, Metal Forming, pp. 42-49, January 1997.
  
  
• V.J. Vohnout, M. Altynova, V.S. Balanethiram, M. Padmanabhan, G. Fenton, A.A. Tamhane and G.S. Daehn: High Velocity Sheet Metal Forming: Recent Advances and Applications, FabTech '97 Conf. Proc. pp. 1413-29, 1997.
  
  
• Impulsive Forming of Sheet Aluminum: Cost Effective Technology for Complex Component Manufacturing, Proceedings of Alumitech, Atlanta, GA, May 1997.
  
  
• M. Padmanabhan: Wrinkling and Springback in Electromagnetic Sheet Metal Forming and Electromagnetic Ring Compression, M.S. Degree, The Ohio State University, Advised by G.S. Daehn, 1997.